Switch Homebrew Apps (Utilities) - GameBrew (2024)

NX Venom is a pack that includes a whole bunch of tools and resources that will allow you to boost the performance of your console, including overclock support.

Of course overclocking your console is not without consequences, it presents a risk for your data, knowing that Horizon OS was not designed for this, and that it is advisable to do this only in emuMMC.

ATTENTION! Overclocking the console does not lead to irreversible consequences, however it poses a risk to data due to the features of Horizon OS. Therefore, it is strongly recommended to use overclocking exclusively in emuMMC and make backups. USE AT YOUR OWN RISK!

1. Make backup and delete everything exceptNintendoandemuMMCfolders on the SD card.
2. Unpack theNX Venomto the root of the SD card. Use a card reader, orHekate→Tools→USB Tools.
3. Use theAll-in-One Switch Updaterhomebrew application for updates.
4. Installation of additional software, as well as patches for games, is done through theUberHandmenu (clickright) →Software Installer.

1. Opening theUberHandmenu (as well as exiting theStatus Monitor) by a combinationZR + ZL + Down.
2. Use thesys-clk-ocoverlay to manage overclocking.
3. Use theEOS Wizard(go to theUberHandmenu, press therightbutton) to change the parameters of the loading kip.
4. The lower the acceleration parameters, the safer and the fewer side effects. Use wisely!
5. Recommended overclocking parameters for portable mode and battery life: CPU1020 - 1428, GPU768 - 921, Mem Max.

Hardware Requirements

• Nintendo Switch V1 (Erista)
• Nintendo Switch V2 (Mariko)
• Nintendo Switch Lite (Mariko)
• Nintendo Switch OLED (Mariko)

Software Requirements

• Uberhand Overlay (included in the NX Venom)
• EOS official loader.kip (included in the NX Venom)

Settings

• CPU
  • Undervolt Mode: CPU energy efficiency management (Marico only)
  • Voltage Max: maximum CPU voltage, recommended 1235mV or below
  • Boost Clock: CPU frequency that affects the acceleration of loading screens in games
• GPU
  • Undervolt Mode: GPU energy efficiency management (Marico only)
  • UV3 Table: custom voltage table (Marico only)
  • Voltage Offset: negative voltage offset value for gpu dynamic voltage calculation
  • Voltage Min: high RAM clocks will require gpu minimum voltage to be raised
• RAM
  • Max Clock: memory frequency, recommended parameters range2133-2400for Mariko and1862 - 2131for Erista
  • Vdd2: supply voltage for the input buffers and core logic of a memory chip
  • Vddq: supply voltage to the output buffers of a memory chip (Marico only)
  • EMC DVB Shift: SoC voltage automatically gets raised with higher dram clock, shift number helps with stability at higher memory clock
  • Timings: timings increase performance, but may affect stability

Uberhand

Preferences for theUberhand overlay

• Key Combo
• Default Menu
• Show Overlays Versions
• Show Packages Versions
• Show Items Separator

Main config:/config/uberhand/config.ini

Sys-Clk-OC

Preferences for the switch sysmoduleSys-Clk-OC

• Allow Unsafe Freqs: allow unsafe frequencies (CPU > 1963.5 MHz, GPU > 921.6 MHz)
• Remove Clocks Capping: remove CPU/GPU clock cappings
• Override Boost Mode: override boost mode frequency with user set values (CPU/GPU)
• Auto CPU boost: for games without official boost mode, activates when CPU core utilize >= 95%

Main config:/config/sys-clk/config.ini
Offical documentation:README for sys-clk-OC

Status Monitor

Preferences for theStatus Monitor(hanai3Bi fork) overlay

• Key Combo
• Show Real Freqs
• Show Real Volts
• Replace RAM Total with RAM Load

Main config:/config/status-monitor/config.ini
Offical documentation:Configuration file

MemToolkitNX

Threads switcher for MemToolkitNX. Don't forget switch to the default after use 4 threads setting

• 3 Threads - Default
• 4 Threads

Fan Tuning

The package is a part of the Uberhand Overlay project which configure and set temperature-related settings for different temperature ranges

Main config:/atmosphere/config/system_settings.ini

Video Capture

A tool that allows you to change the quality settings of the video recording system function

• FPS
• Bitrate
• Key Frame Count

Main config:/atmosphere/config/system_settings.ini

Background Services

A tool that allows you to disable system background processes

Clear AMS Report Logs

A tool that allows you to clear the logs of the Atmosphere CFW, which tend to accumulate in large quantities

Be patient. The installation process may take some time.

• FPSLocker Patches
  

Configs that allow going above 30 FPS, tweak dynamic resolution frame timing for better performance, etc

• MissionControl Switch
  

Use controllers from other consoles natively on your Nintendo Switch via Bluetooth. No dongles or other external hardware neccessary

• Picofly Firmware
  

Firmware related to the rp2040-zero based chip

• NXMP Switch
  

NXMP is a video player for Nintendo Switch based on MPV. NXMP support most popular video format, it support HTTP,FTP,SFTP,Samba,NFS streaming and it also support Enigma2 decoders

• IPSwitch
  

Use text to generate cheats or.ipspatches to use with Atmosphere

• Linkalho Switch
  

Linkalho is an homebrew app that will link NNID accounts offline

• SysDVR
  

Stream switch games to your PC via USB or network

• dvr-patches
  

System patches to stream most switch games with SysDVR

• Emuiibo Switch
  

Virtual amiibo (amiibo emulation) system for Nintendo Switch

• Amiigo
  

Amiigo is a GUI for creating and switching virtual Amiibo for use with the Emuiibo system module

• Studious Pancake
  

Reboot to Hekate configs fromUberHandmenu

• JKSV Switch
  

JK's save manager

• Sys-ftpd Switch
  

Nintendo Switch FTP server as a background service

• QuickNTP Switch
  

A UberHand plugin for Nintendo Switch to sync time with NTP servers

• NXGallery Switch
  

A Nintendo Switch Homebrew Application to transfer your screenshots to your phone or PC in no-time

The rule by which you need to be guided using console overclocking is the absence of side effects. The console should work without atmosphere errors, game crashes, shutdown due to overheating. Having achieved this result, you get a stable console, high performance in games and balanced power consumption.

• If there are problems after installation, try to fix the attributes:Hekate→Tools→Arch Bit
• When useAll-in-One Switch Updater, the answer to "Do you want to overwrite existing .ini config" isYES
• For questions, help, wishes and suggestions, feel free to contact the Telegram groupNintendo Bustersor Discord serverNSwitch 60FPS Cheats & Mods(channel #overlocking).

• Atmosphere
• Hekate
• Sigpatches
• Switch OC Suite
• SaltyNX
• FPSLocker
• ReverseNX-RT
• InfoNX
• Uberhand-Overlay
• Status Monitor
• DBI
• Tinfoil
• AIO Switch Updater
• Lockpick RCM
• TegraExplorer
• Picofly Toolbox

v4.4.6

• Updated SC to 1.2.6
  • AUTO_ADJ_2400 was renamed to AUTO_ADJ_LV; A DRAM mode with less tight timings; It can help to achieve higher frequencies or lower voltages
  • Mariko perf with AUTO_ADJ_LV has been improved
• Updated SC Wizard
  • SC 1.2.6 compatibility

v4.4.5

• Updated Switchcraft to 1.2.5
  • New CPU UV 7 (UV6 high8 + voltage break at 1428 MHz)
  • Added an experimental DRAM timing option “AUTO_ADJ_2400” it can help to reach 2400 MHz on some bad binned switches
• Updated SC Wizard
  • Mariko Cpu High Min Volt range has been expanded
  • Fix bug with colors in Vdd2
  • Added SC 1.2.5 compatibility
• Updated Sys-Clk-OC to 0525
  • Voltage bug on erista is fixed
• Updated AMS config
  • Disable dmnt_cheats_enabled_by_default
• Updated AIO config
  • Unhide Firmwares tab
  • Unhide Cheats tab

v4.4.4

• Updated Switchcraft to 1.2.4
  • Sleep mode fix for CPU UV 1-3 (Erista)
• Updated RAM patches for 8GB MGCL memory modules (not included to NX-Venom, only for modded consoles)
• UPD: Fixed GPU Scheduling option

v4.4.3

• Update Sys-Clk to oc8 final3
  • Reversenx sync now respects clock cappings
  • Fixed issue of sys-clk not working on boot for some people
  • Minor bug fixes and optimization
  • Fixed auto cpu boost
• Updated OC Switchcraft to 1.2.3
  • GPU UV2 revised, should improve the stability of some switches (Erista)
  • GPU auto vmin fine tuning, improved accuracy for some speedos (Mariko)

v4.4.2

• Updated Switchcraft to 1.2.2 pre-release
  • Erista GPU UV tables
    • UV1 = Medel's GPU UV table with an offset of +30mV
    • UV2 = Experimental dynamic high UV table
    • UV3 = Static Custom Table
• Update SC Wizard
  • Unset changed to Auto for GPU Vmin

v4.4.1

• Updated Switchcraft to 1.2.1 pre-release
  • 1305 MHz is now only available if GPU Scheduling is ON (Mariko)
  • Added an additional DVB voltage step for (Erista)
  • CPU UV2&3 enables 2295 MHz (Erista)
• Updated SC Wizard
  • Switchcraft 1.2.1 support
• Updated System Tweaks
  • Added GPU Scheduling option (default OFF)

v4.4.0

• Updated Uberhand to 2.2.5
• GPU performance increased by ~5% for all frequencies
• Updated System Installer
  • Progress bar for installation operations
• Updated System Tweaks
  • Native toggles ON/OFF
• Updated SC Wizard
  • Slider for Speedo
  • Extended memory freqs range to 3000mhz for Mariko
  • Extended CPU boost clock to 2601mhz for Mariko
  • Fixed lags when moving between menus
• Updated Info-NX to 1.0.6 DEMILITARAIZED vers (created by Cooler3D)

• Special thanks to meha, b0rd2dEAth, redraz, b3711, lineon, Ruslan, MasaGratoR, CtC, Efosamark, i3sey, Irene, khmm12, discord communityNSwitch 60FPS Cheats & ModsandRetroNXfor implementing individual components and help with this bundle
• Made with ❤️ by NX community, composed by Catcher in the grain field

• Github - https://github.com/CatcherITGF/NX-Venom